Cascade Shelter
(503) 489-8552 Schedule a call
A black Summit Series II louvered pergola over a stone patio beside a cedar-sided home

Motorized louvered pergola

Summit Series II

Open the roof for sun, close it when the rain comes. Series II hides the motor inside the frame and runs on a sealed aluminum controller box.

  • 6063-T5Powder-coated aluminum
  • Remote or appLouver control included
  • Built to orderSized to your space

What's new in Series II

The Summit Series II louver motor running along the inside of the frame beneath open louvers and blue skyInside the frame
01

Hidden motor

The motor now sits inside the frame. From the patio, all you see is clean aluminum and the louvers.

The Series II aluminum controller box screwed to a wood joist under a backyard deck, with its sealed cables clipped neatly along the beamSealed aluminum casing
02

Heavy-duty controller box

A hard aluminum casing with waterproof wiring. One controller runs the louvers, screens and lights.

Soft white LED strips glowing in the louvers of a pergola roof at nightSealed in silicone
03

Upgraded electronics

LED strips are fully sealed in silicone, and the wiring is waterproof from end to end.

Looking down the inside of a Summit Series II post at the factory, with aluminum ribs running along its inner wallsRibbed, not hollow
04

Reinforced posts

Internal aluminum ribs run the full length of each post. A standard post is hollow inside.

Open, angle or close the roof

The louvers rotate a full 90 degrees. Open them for sun, angle them for filtered light and air, or close them and stay dry underneath.

Closed. Shade and rain cover. Illustrative rendering.
Open. Full sun. Illustrative rendering.

Built into every frame

Louvers that drain

Double-layer blades carry rain into the gutter and down through the posts, so it does not drip on you.

Reinforced posts

Internal aluminum ribs where a standard post is a hollow tube.

Powder-coated 6063-T5 aluminum

A dense powder-coat finish over aluminum that will not rust.

Light built in

Blade lighting in the louvers comes standard. Add a perimeter RGB LED loop if you want color.

Options and add-ons

Turn the pergola into a room. Everything here runs from the same controller as the louvers.

Add them in the 3D Studio
A retractable zip screen lowered on one side of a black pergola at dusk
EnclosureRetractable zip screensDrop a screen on any side to block wind, bugs and low sun. Eight fabric colors.
Aluminum louver shutter panels closing one side of a black pergola, lit from below
EnclosureAluminum louver shutter panelsClose in a side for privacy and shelter, and still let the air through.
A pergola at dusk with light strips glowing down its posts
LightingPost lightsLight running down the posts. Blade lighting already comes standard.

Colors and sizes

Every pergola is built to order in the size your space needs. The frame comes in two weights, chosen by the area you want to cover.

Frame colors Jet Black, RAL 9005 Anthracite Grey, RAL 7016 Traffic White, RAL 9016 Other colors in mind? We can powder coat any color.
Recommended

Heavy-duty frame

Our strongest build, for areas of about 215 sq ft and larger.

Louver width9 in
Beam height11 in
Post7 × 7 in

Medium frame

For areas of about 194 sq ft or less.

Louver width7 in
Beam height7 in
Post6 × 6 in

Not sure which frame you need? We size it to your space on your discovery call.

Design yours in the 3D Studio

Pick your size, color and add-ons, and get a 3D rendering back within one hour.

Schedule a call Open the 3D Studio